Welcome to SICHUAN SAIER VALVE MFG. CO., LTD.
4
CONTACT US
Tel:+86-813-5502212
Fax:+86-813-5502209
E-mail:sevvalve@163.com
    sev-grace@163.com
    sevmaggie@sina.com
Skype:sev-grace 
   maggie1123
GLOBE VALVE
Position: HOME > PRODUCT > GLOBE VALVE
Globe valve
2014.12.30 / VIEW:1396

Globe Valve Manufacturing Specifications

 Content  Specification
 General design standard  BS 1873 or refer to API 600
 Pressure-temperature rating  ASME B16.34
 Face to face dimensions  ASME B16.10
 Flange type and dimensions  ASME B16.5
 Butt-welded end  ASME B16.25
 Inspection and test  API598

● Constriction
SEV globe valve adopt OS&Y. B.B. Rotary Rising Stem and Handwheel, which is in accordance with international general standard.
● Body and Bonnet
After being strictly calculated, the design of the body and bonnet possess good
performance of strength, rigidity, perfect seal and flowing ability. It makes more
reliable for the seal of the packing and more convenient for the replacement of the
packing to have assembled backseat onto the bonnet.
● Seat and Disc
The flat or cone sealing is used for the connection between the seat and disc.
For SEV globe valve in different pressure or specifications, the seat would have the
following types:
  The connection of the seat and the body may either be threaded or welded type.
  The threaded type seat is easy for disassemble, maintenance and replacement.
  The seating surface is directly welded on the body.
For stainless steel gate valve, the sealing surface is machined and finished on
the body.

● Stem and Yoke Sleeve
The thread coordination of the stem and yoke sleeve adopts appropriate fit clearance and special thread remedy to ensure flexibility of the valve’s actuation and the valve’s self-locking ability. The contact part of the disc and stem is inserted with a piece of hard stainless steel material, so that this part will not deformed by pressing, nor be rusty to effect flexibility of the disc’s operation.
● Packing and Lantern Ring
The dimension and quantity of the packing conform to the standard to ensure the reliability of sealing. Packing materialsare made of graphite (free of asbestos). The lantern ring may be supplied if the customers require.
● Gasket
Connection between body and bonnet shall be Bolted Flange. Gasket of Flange

shall be as follows:

Class 150

Flat Gasket

Class 300

Female or Male Gasket

Class 600&larger

Octagon Ring Gasket

The metal spiral wound gasket with inner ring and filling with graphite makes more reliable for the seal of the gasket and excellent capability of disassembling and reassembling.

Print】 【Collect】 【Close